Service 04 · Subtractive manufacturing
CNC Machining
CNC milling and turning produces precise parts from solid stock — the right choice when you need tight tolerances, specific materials or production-grade surfaces that printing can't deliver.
Precision from solid stock
The tightest tolerances in our shop
Our multi-axis machining centres handle complex prismatic and revolved parts in both metal and plastic. Combined with in-house inspection, CNC is the backbone for parts that must fit, seal and perform.
- 3, 4 and 5-axis milling; CNC turning
- Typical tolerance ±0.02 mm
- Wide material range — metal and engineering plastic
- Threads, bores, flatness and surface finish to spec
Technical specifications
Materials & parameters
| Processes | CNC milling (3/4/5-axis), CNC turning (lathe) |
| Metals | Aluminium 6061/7075, steel, stainless 304/316, brass, titanium |
| Plastics | ABS, POM (Delrin), PEEK, PC, nylon, acrylic |
| Typical tolerance | ±0.02 mm (±0.05 mm for large parts) |
| Max size | Up to ~1000 mm on the longest axis (machine-dependent) |
| Surface finish | As-milled, bead-blast, anodize, plate, polish |
| Best for | Precision parts, housings, brackets, fittings, jigs |
Aluminium parts
Lightweight housings, brackets and heatsinks.
Stainless fittings
Corrosion-resistant components for fluid and food use.
Plastic prototypes
ABS, POM, PEEK parts with real material properties.
Brackets & mounts
Rigid, dimensionally stable structural parts.
Threads & seals
Machined features that print processes can't hold.
Bridge production
Low-volume runs before injection tooling exists.
Machining bayMulti-axis
Precision partTight tolerance
EquipmentIn-house
Finished partAnodized
Need a precision-machined part?
Upload your drawing or model and get a quote with DFM feedback.
Get a Quote