Manufacturing services

Six processes, one production floor

Pick the method that fits your part today — and change it tomorrow. Every process below is run in-house, so your project never leaves our facility.

Stereolithography resin printing for high-detail concept models, form-fit checks and finely finished display parts.

Selective Laser Sintering for strong, flexible, support-free functional parts and batch runs.

SLM printing in stainless steel, titanium and tool steel for end-use components and tooling.

3, 4 and 5-axis milling and turning in metal and engineering plastics with tight tolerances.

Silicone-mold urethane casting for 10–200 piece runs with production-grade surface finish.

Painting, electroplating, anodizing, coating and polishing to make parts market-ready.

How to choose

Matching the process to the part

Process	Best for	Typical tolerance	Volume
SLA	Detailed models, smooth surfaces, clear parts	±0.1 mm	1 – 50
SLS	Functional nylon parts, no supports, batches	±0.2 mm	1 – 200
Metal 3D	End-use metal parts, tooling, complex geometry	±0.1 mm	1 – 100
CNC	Precise metal/plastic parts, tight tolerances	±0.02 mm	1 – 500
Vacuum casting	Polyurethane copies of a master, soft materials	±0.2 mm	10 – 200
Finishing	Paint, plate, anodize, coat, polish any of the above	—	Any

Tolerances are typical values and depend on geometry, material and part size. Final spec is confirmed during DFM review.

Send your file and our engineers will recommend the best method and material.

Get a Quote