Metal 3D Printing
Selective Laser Melting (SLM) builds fully dense metal parts directly from powder. It unlocks geometries that are impossible to machine and shortens the path from design to a real metal component.
End-use metal parts, without the tooling
Metal printing consolidates assemblies into a single part, builds internal cooling channels and removes the lead time of traditional tooling. We finish every part with heat treatment, support removal, machining and surface treatment as required.
- Fully dense, isotropic mechanical properties
- Complex internal features and lightweight lattices
- Short runs of end-use parts and spare components
- Follow-on CNC and finishing for critical features
Materials & parameters
| Technology | SLM / DMLS (laser powder bed fusion) |
| Materials | 316L stainless, 17-4PH, Ti-6Al-4V (Grade 5), tool steel (MS1/18Ni300), AlSi10Mg |
| Typical tolerance | ±0.1 mm (tightened by follow-on CNC where needed) |
| Layer thickness | 0.03 – 0.06 mm |
| Max build size | Up to ~250 × 250 × 300 mm (machine-dependent) |
| Post-processing | Stress relief, support removal, CNC, bead-blast, polish, plate |
| Best for | End-use parts, tooling, manifolds, fixtures, spares |
Aerospace & auto
Lightweight brackets, ducts and mounting hardware.
Tooling & jigs
Injection-mold inserts, fixtures and grips.
Medical parts
Implant-grade titanium prototypes and instruments.
Heat exchangers
Internal conformal cooling channels.
Spare parts
Low-demand metal components, made on demand.
Research
Custom hardware for labs and universities.
Have a metal part to produce?
Send the CAD file and we'll advise on material and finishing.
Get a Quote